• > Proven and flexible inspection and traceability solutions for security documents:

    banknotes, ID, e-passeports…

    Lineavision® reliably allows to automatically inspect the quality during production and to continuously check for conformity at the paper making level and during insertion of various security features for paper securisation (OVD stamping, iridescent and OVI printing). According to the defect gravity, control of the rejection ratio is flexible. Lineavision® combines quality and productivity.

    Security features inspected:

    • Paper
    • Watermarks
    • Security threads
    • Electrotypes
    • OVD foil
    • Iridescent and OVI printing
    • Fibers…
    • Intaglio printing

    Linéavision® for fiduciary application at the paper-making level is optimally suited for:

    • Checks of all security features according to sheet position (synchronization in registry)
    • Controls of positions and dimensions of all security features
    • Detection of aspect defects with different sensitivities according to the sheet location
    • Provides inspection report per roll and sheet

    > Security printings inspection

    Lineavision® for security printings application allows to control either the printed sheets at any production steps, or the final banknotes for the batch validation.

    The inspection solution installed at Offset, Intaglio, OVI/ OVMI, and Numbering printings steps, guarantees the perfect quality and maintain the yield at the highest level.

    The final banknotes for the batch validation consists in higher resolution printing inspection, dimensional control and all other security features applied during the paper manufacturing.


    Lineavision® ensures:

    • Compliance with high secure market requirements,
    • Yield maximization and waste reduction,
    • Quality management & traceability.

    > Flexible printed Electronics high-resolution and traceability solutions

    IN-CORE Systèmes provides unique solutions for flexible printed circuits, based on its expertise in image acquisition. These applications require a very high resolution inspection to avoid short circuits and to ensure:

    • Precise building up of the layers,
    • Repetitiveness and regularity of the global printing and coating processes,…
    • Dimensional control of coated patterns (width positions, edge straightness, overlapping,etc)

    IN-CORE Systèmes solution for Flexible printed electronics helps to optimize the coating or printing processes, in order to achieve optimal module performance.

    Lineavision® IN-CORE Systèmes’ solutions optimally suited for manufacturers to:

    • Check in registry all printed features
    • Control positions, distances and dimensions of all printed features and layers
    • Detect aspect defects
    • Report inspection results per circuit and cell

    Control web registration, web tension and other web properties

    > High resolution inspection solution to control, measure and monitor all process parameters at each production step enhancing knowledge of critical process parameters

    As a global supplier of optical inspection solutions for OPV R2R or S2S manufacturing, we participate in the progress of finding solutions for particular issues. The economical and technical challenges of the OPV manufacturing process require producers to control, measure and monitor all process parameters at each production step.

    Lineavision® inspection solution is optimally suite for minimizing the number of defects on circuits in order to improve life time and efficiency:

    • Substrate surface inspection:
      • ITO plane or patterned surface regularity in R2R
    • Process inspection:
      • Precise layer stacking of functional layers: control of positions, regularity and dimensions of all printed/coated layers,
      • Geometrical patterns features measurements: position & registration, alignment, edge regularity, spacing
      • Shorts : conducting particle between layers
      • Coating defects   
      • Encapsulation defects
    • Traceability and optimal quality data processing management: track and trace the  defective circuits/modules, identify the origin of the defect, archive & consolidate all processed data.


    Lineavision® characterisation platform, based on high-resolution image analysis, enables non-contact inspection and measurements on printed electronics surfaces.

    Using advanced characterisation capability, the platform analyzes single and multilayer structures for defining and assessing quality, and various manufacturing process steps.

    IN-CORE Systèmes high-resolution characterization platform offers:  

    • Modular high-resolution solution
    • Characterisation of complex products
    • Production yield optimisation

    Lineavision® platform is optimally suited for characterisation all process steps:

    Dimensional measurements:

    • position control of layers and elements,
    • Stacking/ alignment

    Quality assessment:

    • Foreign particles inclusion,
    • Scratches,
    • Structuring and laser scribing defects,
    • Pattern and print quality.

    Our solution addresses various electrical components (Flexible batteries, Printed circuits, RFID antennas/label, sensors, Transistors), within R&D and manufacturing sectors such as OLEDs, Smart systems, and many more.

    > Global defect management on high-performance composite materials:

    Carbon, Glass, Kevlar, Aramid, in UD or fabric structures

    Lineavision® for Aerospace applications is used to fulfill the quality standards of major aerospace manufacturers for defects which must be detected for security and safety reasons, traced and removed. Composites materials, and especially carbon surfaces, must be fully compliant with quality requirements in order to ensure that final products, such as the structural part of planes, reinforcements for aerospace, etc..., match a zero defect policy.

    IN-CORE Systèmes solutions are globally certified for pre-impregnated UD and woven fabrics dedicated to aerospace products:

    • Structural parts and wings for airplanes,
    • Propulsor for shuttles,
    • Helicopter blades,
    • Etc...



    > Global defect management for woven technical textile

    Lineavision® for woven technical textile inspection enables to have a close look at the technical textile surface manufacturing should it be plain or converted. Accurate quality management and process monitoring are performed in a continuous way and enable to catch all surface flaws, monitor textile structure distortions and check surface flatness and homogeneity as well as width regularity.

    Lineavision® inspection solution for woven technical textile is optimally suited for:

    • Weaving defects inspection: plain or jacquard weaves, pattern alignment
    • Finishing defects inspection 
    • Weft deviation inspection: weaving, coating, hot stamping process monitoring
    • Coating defects inspection
    • Contaminations inspection
    • Wrinkle, streaks, holes... Inspection


    Technical Textile Applications:

    • Automotive applications


    > High resolution inspection solutions for Lithium-ion, Lithium-polymer batteries:

    Electrodes (anode, cathode) & Separator

    Lineavision® for battery applications provides flexible inspection and measurement solutions: safety, efficiency and life time of the products are the biggest challenges.
    The inspection solutions guarantee the perfect quality of electrodes and separators, essential to ensure high capacity storage, fast recharging and long life cycle.

    Inspection solutions In-core Systèmes for Lithium-ion, Lithium-polymer batteries : Anode, Cathode and Separator quality monitoringIN-CORE Systèmes high-resolution solutions enable to:  

    • Ensure repetitiveness and regularity of the global process coating
    • Manage defects to optimize the production costs
    • Monitor the production quality

    Lineavision® for battery applications is optimally suited for manufacturers to:

    • Inspect the electrodes surface quality: raw material (foil defect, surface cleanliness),
    • Detect coating defects such as bubbles, agglomerates, coating free area (pinhole, etc.), scratches, streaks, inclusions around 20µm, etc...
    • Control of coated patterns (width positions, edge straightness, overlapping, skip coating etc...)
    • Increase cell performances

    The main applications are the new trends in automotive industries with HEV (hybrid electric vehicle), EV (electric vehicles), wind generators and solar farms.

Automatic camera based web inspection and in-line measurement solutions for continuous processes

IN-CORE Systèmes based in Saint Priest France, is a leading technology company who made a name for itself for more than 18 years now in the specific field of vision inspection solutions.

IN-CORE Systèmes, as a proven inspection system designer and manufacturer, combines core competencies in-house thanks to optical methods for 100% surface material inspection for continuous or discontinuous processes and measuring solutions, implementing innovative 2D and 3D image processing technology combined with high performance illumination and proprietary computer technology.

IN-CORE Systèmes serves mainly converting applications collaborating with national and international key players such as research centers, manufacturers and end-users from the Fiduciary, Holographic, Printed Electronics, Composite, Healthcare & Hygiene, Secure labelling, Automotive Industries among many others.

Our industrial solutions address a wide range of surfaces: security paper, printed banknotes, composite materials, flexible electronics, woven technical textile, non-woven materials, metallic foil, flat glass etc.

We strive to build our success on our ability to design modular, high-quality and innovative sustainable industrial solutions based on team-work, both internally and externally, with our customers and suppliers.

Over 2500 systems are installed worldwide.


Real time automatic line-scan camera based web inspection and in-line measuring solutions for continuous processes.

Using the latest technology of high speed line-scan cameras and lighting systems tuned to various converting applications, IN-CORE Systèmes combines in-line multi-surface material inspection (anomalies detection), dimensional measurement of various surface characteristics in real time and implementation of full traceability solutions.

Our turnkey global solutions are based on three fundamental principles:

  • Image acquisition technology: camera based visual inspection systems using LED light modules focused on a wide range of wavelengths
  • Control in real time: hard & software infrastructure for surface defect aspect detection and dimensional measurements of surface characteristics in real time
  • Global Traceability at each process step, from substrate to final product combined with customized data management